How to Repair a Saab 93 Key Fob
There's a high chance that your Saab 9-3 key fob has a faulty electronic chip. The metal component of classic car keys was easy to copy, but the modern key fobs come with an immobilizer system that protects your vehicle.
The first step in determining the reason your key fob isn't working is to replace the battery on your key fob. It's a cost-effective and simple fix.
How to program the Saab 93 Key Fob
Saab keys let you to control the doors, trunk, and engine of your car. They also unlock the fuel door and activate a panic button. These remotes can also be programmed with the transmitter in your car. To do this, simply insert the key in the ignition and turn it to the ON position. Follow the Tech2 instructions until you have programmed the keys that you want to use on the vehicle.
New Saabs had two keys, while used ones often come with only one. You can upgrade your key by re-installing the transmitter, which is the transponder, and programming it using an electronic device that is called a Tech-2. This is done at the Saab dealership. In order to make it work, you'll need a matching key. This is an expensive task however it's much less expensive than replacing your entire CIM system with locking cylinders and if you lose your sole working key.
Saab key fob replacement for 93
Saab owners who have lost their only key should replace it with an additional one as soon as possible. The key fob, unlike the keys made of metal used in automobiles up to 20 years ago is an electronic device that communicates with your vehicle via a special microchip. This is what makes the car recognize the key fob and stop it from being copied. Dealers are able to do this however it could be expensive. You can avoid this problem by purchasing a new Saab key online.
The primary reason to have an additional key is that it will protect your vehicle if you should lose it. The criminal is more likely to locate a spare key rather than the one stolen. The majority of thieves don't have the equipment necessary to copy these more modern keys. They'd require a special machine to accomplish this however even that is not a foolproof method of protecting your car from theft.
A spare key can save you money in the process of replacing the SAAB 9-3 remote's battery. All electronic units within the key fob come with batteries and eventually die. It is simple to change the battery, but you must be careful to not to damage the electronics inside the case. You can view videos on Youtube to learn how to complete this task, such as the Cyclone Cyd videos.
Saab 93 key fob battery
If you've been experiencing delays in the response of your key fob, then it's time to replace your battery. While there could be other reasons for the delay the dead battery is most likely to be the culprit. This is a low-cost and simple solution, so don't hesitate.
To remove the backup key, first remove the fob. To accomplish this, press firmly on the Saab logo and pull down on the key ring loop. Inject a flathead phillips screwdriver in the indentation of the key fob case. To remove the case, twist the screwdriver. The plastic should not be damaged if you don't apply excessive force.
You can see the electronic components inside the case once you open it. The circuit board is connected to the case using metal retaining clips. If these are rusty or dirty, the fob will not work properly. You can clean them by using ruby alcohol. www.g28carkeys.co.uk is temporary solution. The clips will wear out eventually and will need to be replaced.
Test the door locks of your car with the backup remote prior to you replace the battery. If it's working correctly it's probably a problem with your main key fob. Replacing your battery should solve the problem, but if still experiencing delays when you lock or unlock the doors, it's likely something else is wrong with the car.
Saab key fob case with 93 keys
If your key fob case is looking worn out, a simple solution is to buy a new. They are readily available online and can be fitted to your remote control. All you require is a flathead screwdriver and a bit of patience. Just insert the screwdriver into the slot in the middle of the case, and then gently work it to open. Make sure you don't damage the limiters holding the battery in place. After removal of the emergency key and badge, the new case can be put into the existing electronics. It won't require any reprogramming.
The best key fob case has a lining that stops signals from being sent to the key fob. This is important because the signals are the ones that allow your car to start. Some of these cases feature silver layers while others are made of copper, which can distort transmissions.
Key fobs are an excellent way to safeguard your keys. It can help you keep the track of your key fob, and help you locate it in the dark when you get to your vehicle. A quality key fob case will keep your keys protected from theft, and will also add a bit of fashion to your keychain.